Radio Portatil ICOM IC-A25CE
HANDHELD VHF AIRBAND TRANSCEIVER
Radio portátil IC-25CE de banda aérea VHF, cuenta con elevadas prestaciones lo que facilita buenas comunicaciones, entre otras prestaciones por su potencia de salida (6W PEP). Fácil de manejar por su diseño ergonómico, por su teclado ampliado y por su pantalla LCD de matriz de puntos. 200 canales, canal de separación de 8,33kHz, MIL-STD810G.8.33 kHz y 25 kHz de espacio entre canales.
Pantalla LCD grande de 2,3 pulgadas de alta visibilidad y modo nocturno, 8.33 kHz y 25 kHz de espacio entre canales, función de tono lateral, capacidad interna de VOX, recuperación del canal "Flip-Flop", ANL (limitador automático de ruido) para reducción de ruido, IP57 protección contra el polvo y construcción a prueba de agua, Bluetooth incorporado para operación manos libres (para IC-A25NE), GPS integrado con waypoint simplificado NAV (para IC-A25NE), funciones de navegación VOR (para IC-A25NE), función de búsqueda de estación cercana (para IC-A25NE).
Next Generation Icom Air Band Radio with Built-in GPS and Bluetooth®
6 Watts High RF Output Power
For expanded communication coverage, output power has been increased to approximately 6 W typical (PEP)/ 1.8 W typical (carrier) compared to the IC-A24E (5/1.5 W PEP/carrier).
Often used functions are assigned to the keypad and you can directly access a desired function. The enlarged flat sheet keypad offers smooth and swift operation.
2.3 inch Large High Visibility LCD
The 2.3 inch large, high contrast and high visible LCD displays user-friendly, graphic screens and ensures good readability under direct sunlight. The operating frequency in large characters can be recognized at a glance. In addition, the night mode option enables easy viewing in low light conditions.
"Flip-Flop" Channel Recall
The IC-A25NE/CE stores the last 10 channels used. You can easily recall those channels by using the directional keys, the channel knoband the 10 keypad. This is convenient for switching between several channels, such as NAV and COM channels. In addition, you can freely edit (replace, delete, change order) the stored recall channels.
Built-in Bluetooth® for Hands-Free Operation (for IC-A25NE)
A third-party wireless Bluetooth® headset, like a 3M™ Peltor™ WS™ 5*, provides convenient hands-free operation. Also, by using the optional VS-3 Bluetooth® headset, the side tone function can be used.
* Compatibility not guaranteed.
Intelligent Battery with Detailed Battery Status
The supplied BP-288, 2350 mAh typical intelligent battery pack, provides up to 10.5 hours* of operating time. You can check the condition of the battery pack in the battery status screen. It is very useful for optimum charging and battery health maintenance.
* Typical operation with Tx: Rx (Max.audio): standby=5:5:90. (Bluetooth OFF, GPS ON)
- IP57 dust-protection and waterproof construction
- Operate with six AA size alkaline batteries with the BP-289 battery case
- BNC antenna
- 121.5 MHz emergency key
- Priority watch
- VFO scan, memory channel scan, priority scan
- ANL (Auto Noise Limiter) for noise reduction
- Side tone function enables you to hear your own voice from an external aviation headset
- Internal VOX capability
- 300 memory channels (in 15 memory groups) with 12 character names
- 8.33 kHz channel spacing
VOR Navigation Functions (for IC-A25NE)
The CDI (Course Deviation Indicator) is detailed like a real VOR instrument, and displays any deviation from your course.
The OBS (Omni Bearing Selector) enables you to change course from the original flight plan.
The TO-FROM indicator shows the position relationship between your aircraft and the course selected by the OBS.
The ABSS (Automatic Bearing Set System) function enables you to set the current course as a new course in two simple steps.
Near Station Search Function (for IC-A25NE)
The near station search function assists you in accessing nearby ground stations. The function searches for nearby stations using the station memories that have GPS position information. To use the near station search function, position data and frequencies of the ground stations must be programmed.
Built-in GPS Receiver with Simplified Waypoint NAV (for IC-A25NE)
The simplified waypoint NAV guides you to a destination by using current position information from GPS (also GLONASS and SBAS). The waypoint NAV has two functions: Direct-To NAV and Flight Plan NAV. Up to 10 flight plans and 300 waypoints can be memorized in the IC-A25NE.
Flight Plans with Android™ /iOS™ App (for IC-A25NE)
Using the RS-AERO1A (Android) or RS-AERO1I (iOS) application, you can make flight plans on an Android/iOS device and import the plan into the IC-A25NE via Bluetooth. The following four functions are available: Create a flight plan, set Direct-To NAV, display flight plan information and display waypoint information.
* Additional certification may be required for some countries. Enquire with your local authority for details.
|NAV and COM||NAV and COM channels||COM channels|
|Frequency range||Tx||118.000–136.992 MHz|
|Rx||108.000–136.992 MHz||118.000–136.992 MHz|
|Number of memory channels||300 channels/15 groups|
|Channel spacing||25/8.33 kHz|
|Type of emission||6K80A3E, 5K00A3E|
|Power supply requirement||7.2 V DC (BP-288), 11.0 V DC (External DC Jack)|
|Current drain (approximately)||Tx High||Less than 1.8 A|
|Rx Max. audio/Stand-by||Less than 500 mA |
90 mA typ. (GPS, Bluetooth, Light: OFF)
|Antenna impedance||50 Ω|
|Operating temperature range||−20 °C to +55 °C|
(W × H × D;)
(Projections not included)
|58.9 × 148.4 × 31.8 mm|
|Weight (approximately)||340 g (with BP-288)|
|Output power (at 7.2 V DC)||6.0/1.8 W (PEP/carrier)|
|Audio harmonic distortion||Less than 10% (at 85% modulation)|
|Harmonics Spurious emissions||Less than −36 dBm |
(except operationg frequency ±1 MHz)
|Frequency stability||±1 ppm|
|Intermediate frequencies||46.35 MHz/450 kHz (1st/2nd)|
(6 dB S/N)
|Less than 0 dBμ|
(12 dB SINAD)
|Less than 0 dBμ (with CCITT filter)|
|Squelch sensitivity (at threshold)||Less than 0 dBμ|
|Adjacent channel rejection||More than 60 dB|
|Spurious response||More than 70 dB|
|Hum and noise||More than 40 dB (at 90% modulation)|
|Audio output power||More than 350 mW typ. |
(8 Ω load/60% modulation at 10% distortion)
|Ext. speaker connector||3-conductor 3.5 (d) mm (1⁄8ʺ)/8 Ω|
Measurements made in accordance with EN300 676-2.
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Applicable U.S. Military Specifications
|Low Pressure||500.5||I, II|
|High Temperature||501.5||I, II|
|Low Temperature||502.5||I, II|
|Rain Blowing/Drip||506.5||I, III|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Applicable IP Rating
|Ingress Protection Standard|
|Dust & Water||IP57 (Dust-protection and Waterproof* protection) |
* One meter depth for 30 minutes.